-
3D Printed Blood Pumps
with heart failure. However, the production of blood pumps is complex and expensive. Project OPTIFLOW 3D PROFACTOR, the Medical University of Vienna, Bionic Surface Technologies GmbH, UpNano GmbH, Lithoz [...] possibility to specifically structure the surface to enable ideal biocompatibility. In the OPTIFLOW 3D project, which is funded by the FFG, various technically and medically unexplored approaches are being
-
COMBO3D
- /en/research-topics/numerical-process-simulation/projects/combo3d
COMBO3D COmposite Mould Tool Based On 3D Printing Fig. 1: 3D-printed CFRP mono-block © Lehrstuhl für Carbon Composites, TUM COMBO3D (COmposite Mould Tool Based On 3D Printing) is a European joint project [...] guarantee the temperature homogeneity in the RTM method. Facts COMBO3D – COmposite Mould Tool Based On 3D Printing Programme: H2020-EU.3.4.5.4. - ITD Airframe, Clean Sky 2 Joint Undertaking Funding agency: [...] project that demonstrates the possibility of 3D-printing an advanced thermoplastic composite molding tool using additive manufacturing . Fabricated by its project coordinator, Chair of Carbon Composites of
-
COMBO3D: 3D printed tool for industrial manufacturing
COMBO3D (COmposite Mould Tool Based On 3D Printing) is a European joint project that demonstrates the possibility of 3D-printing an advanced thermoplastic composite molding tool using additive manufacturing [...] Fabricated by its project coordinator, Chair of Carbon Composites of Technical University of Munich, these 3D-printed advanced tools will be further used as resin transfer mold (RTM) tools for the production of [...] is on the optimal cooling channel design. As result, the world largest CFRP mono-block was 3D-printed as an RTM tool (fig.1) which uses LKR proposed counter-flow channels. To achieve a more homogeneous
-
VALU3S
- /en/research-topics/dependable-systems-engineering/projects/valu3s
VALU3S (Experimental) Verification and validation of automated systems against common requirements such as safety, security, and privacy, using a layered test framework. Manufacturers of automated systems [...] systems and their components have been allocating an enormous amount of time and effort in R&D activities for developing new technologies and systems. Those innovations translate into an overhead on the V&V [...] reliably. This process is currently very time-consuming and thereby costly. The ECSEL JU project VALU3S (“Verification and Validation of Automated Systems’ Safety and Security”) aims to evaluate the sta
-
FiBack3
- /en/research-topics/dependable-systems-engineering/projects/fiback3
FiBack3 Increasing the security of devices procured by BMLV (embedded systems) by examining binary files for backdoors. A large part of the critical IT infrastructure and IoT devices used by the BMLV is [...] is manufactured outside of Austria and Europe. The FiBack3 project, which is being carried out as part of the FFG funding program FORTE (2020), aims at the (partly) automated analysis of this more critical [...] manufacturer. Until now, such an analysis was largely manual and therefore very time-consuming. FiBack3 will increase automation of this process, from firmware extraction to backdoor detection, and thus create
-
3D inline surface inspection with xposure:photometry
Automated optical surface inspection for quality control is an integral part of industrial manufacturing processes. The AIT Austrian Institute of Technology supports companies in being internationall
-
3D-Druck von Leichtmetallen: LKR leitet COMET-Projekt
Vor kurzem erfolgte das Kickoff für das COMET-Projekt „We3D“ (Wire-based additive manufacturing – materials and technologies – for 3D metal structures of the future). In den nächsten vier Jahren forscht [...] gefertigt werden. Im Rahmen des COMET-Projekts „We3D“ soll WAM nun entsprechend weiterentwickelt werden: Ziel der Forschungsvorhabens mit einem Gesamtvolumen von 5,3 Mio. Euro ist es, die Technologie für neue [...] WAM gilt als künftige Schlüsseltechnologie, bei der Schweißdrähte für den schichtweisen Aufbau großer 3D-Teile verwendet werden, die mit pulverbasierten AM-Technologien nicht hergestellt werden können. WAM
-
We3D
- /en/research-topics/wire-based-additive-manufacturing/projects/we3d
We3D Light metal components from the 3D printer With the funding commitment for the COMET project "We3D" (Wire-based additive manufacturing – materials and technologies – for 3D metal structures of the [...] processed. We3D: Next generation additive manufacturing Wire-based Additive Manufacturing (WAM) is regarded as a key future technology, using welding wires for the layer-by-layer manufacturing of large 3D parts [...] the framework of the COMET project "We3D", WAM will now be further developed accordingly: The aim of the research project with a total volume of approximately 5.3 million euros is to further develop the
-
High-speed 3D inspection with any industrial camera
fields of applications. He will also address a recently published study comparing AIT ICI with other 3D imaging technologies on the market. The study showcases that the strengths of AIT Inline Computational
-
3D Road Texture Scanner
- /en/solutions/acoustics-and-noise-abatement/3d-road-texture-scanner
3D Road Texture Scanner Lab on the road At the AIT Center for Transport Technologies, we investigate tyre-road interaction to reduce tyre rolling noise, increase safety (grip) and reduce tyre rolling [...] High-precision capture of the 3D texture of a road surface “Lab on the road” for science and industry Automated road condition monitoring for road authorities Correlation of 3D texture parameters with rolling [...] resistance (CO2 emission). We have therefore developed a new high-performance 3D road texture scanner that enables precise scanning of the road surface - on test panels or small sections, or even in moving
-
New plugin for 3D height measurement in cloud-compare
Users of the 3D point cloud and mesh processing software CloudCompare can now enjoy a new 3D measurement tool for determining the height of points in virtual models. Philip Klaus, employee of the research [...] Imaging AIT Inline Computational Imaging (ICI) is a novel single sensor technology for simultaneous 2D and 3D inline inspection even for challenging inspection tasks. For more information see: https://www.ait [...] until now. "We work a lot with CloudCompare to visualize, measure, cut and evaluate the quality of our 3D reconstructions we get through our Inline Computational Imaging System. But unfortunately, it was not
-
3D audio navigation for elderly people
become a challenge. The target group needs intuitive navigation aids with a low entry barrier. In the 3D Audio Navigation project, the AIT Center for Technology Experience, Dreamwaves and the Hilfsgemeinschaft
-
We3D: Lightmetals Components from the 3D Printer
Technology: With the funding commitment for the COMET project "We3D" (Wire-based additive manufacturing – materials and technologies – for 3D metal structures of the future), a comprehensive research project [...] processed. We3D: Next generation additive manufacturing Wire-based Additive Manufacturing (WAM) is regarded as a key future technology, using welding wires for the layer-by-layer manufacturing of large 3D parts [...] the framework of the COMET project "We3D", WAM will now be further developed accordingly: The aim of the research project with a total volume of approximately 5.3 million euros is to further develop the
-
3D camera for various detection applications
- /en/research-topics/surveillance-protection/design-and-development-of-embedded-vision-systems/3d-camera-for-various-detection-applications
3D camera for various detection applications 3D camera for various detection applications This EMC certified stereo camera head consists of three embedded image sensors with an integrated Ethernet hub [...] hub and is powered over Ethernet. 3D depth calculation software is available. The design can be used for various security-relevant surveillance applications such as tailgating or piggybacking. Three cameras
-
BMDW supports 8 projects in the FFG programme COIN with around 3.5 million euros
the further development of the Styrian harmonica (Quetschn) with the help of digitalization (keyword 3D printing), to the early diagnosis of dementia using artificial intelligence, to a network for the [...] Ministry for Digitisation and Business Location (BMDW) is funding a total of eight projects with around 3.5 million euros. The Austrian Research Promotion Agency (FFG) will be responsible for handling the projects
-
3D Dentalscanner
- /en/about-the-ait/center/center-for-vision-automation-control/assistive-autonomous-systems/projects/3d-dentalscanner
3D Dentalscanner Under a contract research project sponsored by dental technology company a.tron3d of Carinthia, Austria, experts from the AIT have developed the smallest intelligent optical 3D scan sensor [...] impressions. In collaboration with our partner, a.tron3d, the AIT team succeeded in developing something novel and unique in the area of 3D technology. The 3D intraoral scanner is equipped with a stereo camera [...] thus acquired is used to create a 3D image in real time, thus obviating the need for time-consuming silicone impressions. Thanks to its extremely practical shape, the 3D intraoral scanner is fully mobile
-
3D-printed lightweight aluminum tanks
Oops, an error occurred! Code: 20240905093501706e8f01
-
UAR Innovation Network 360°: LKR präsentiert Wire-based Additive Manufacturing
Fertigung“. Dabei wird es insbesondere um die Forschungsarbeit im COMET-Projekt We3D gehen, in dessen Rahmen der Draht-basierte 3D-Druck von Leichtmetallen entsprechend weiterentwickelt und auf eine neue Stufe
-
PaveScan 4D
- /en/research-topics/road-condition-monitoring-assessments/projects/pavescan-4d
PaveScan 4D High-Density Pavement Scanning for Condition Monitoring of Roads In this project a mobile laser scanning system was developed that measures and analyses highly dense 3D profiles of complete [...] measurement techniques for 3D road profiling and pavement surface analysis, respectively, the former is typically performed by laser scanning devices that generate spatially referenced 3D point grids of the road
-
So that the computer doesn't mistake a Chihuahua for a muffin
in manufacturing processes. It uses the natural transport motion of the object for simultaneous 2D and 3D surface detection under different viewing and illumination directions, mimicking human inspection
Searched for "3d'".
Found 237 results in 32 milliseconds.
Displaying results 61 to 80 of 237.