Inhaltstyp
Kategorien
-
DEDAluS
- /en/research-topics/wire-based-additive-manufacturing/projects/dedalus
through extensive theoretical and experimental work (objective 1). Alloy wires were then fabricated and tests carried out to characterise the WAAM-printed samples (objective 2). Process studies increased the
-
EMPA-Trac
- /en/research-topics/high-efficiency-power-electronics/projects/empa-trac
versatility and total cost of ownership for numerous challenging municipal applications in a demo field test with five municipalities from the Climate & Energy Model Region Tullnerfeld-East participating. Facts
-
Space-Al-MMC
- /en/research-topics/wire-based-additive-manufacturing/projects/space-al-mmc
samples show promising results and complete infiltration of the fibres was achieved. The samples were tested under conditions similar to those in space and no performance degradation was observed. In addition
-
AZ91-PMD
- /en/research-topics/wire-based-additive-manufacturing/projects/az91-pmd
succeeded in producing welding wires with a diameter of 1.6 mm for the PMD process in the highest quality. Test specimens were welded and both corrosion and mechanical properties were derived. It was demonstrated
-
IntelLiGent
- /en/research-topics/sustainable-smart-battery-manufacturing/projects/intelligent
processes cutting edge materials to final electrodes on pilot scale. Promising material candidates are tested in multilayer pouch cells and electrodes are distributed to partners for further development. David
-
JOICE
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/joice
and mechanical sub-systems as well as icephobic/superhydrophobic coatings Documentation of icing tests with the aid of high-resolution optical methods including roughness evaluations of ice surfaces D
-
ORCHESTRA
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/orchestra
wiring harness solutions, thermal management, electrical energy storage, experimental and virtual testing, and system integration. The consortium partners from academia (Uni Nottingham), research (AIT, CIRA
-
InSPIRe
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/inspire
LE composite structure. Performance verification are pursued by means of an Icing Wind Tunnel (IWT) test campaign to contribute to reaching TRL5 for the selected IPS technologies. Facts InSPIRe - In novative
-
SUBLIME
- /en/themen/solid-state-batteries/projects/sublime
is the development of a comprehensive value chain, spanning from initial requirements to rigorous testing, for novel sulfide electrolyte-based solid-state battery cells with increased charge and energy densities
-
Im-Fluge
- /en/research-topics/capturing-experience/projects/im-fluge
VR to simulate use along intermodal travel paths, the project enables prototype development and testing of (1) confidence-building user interaction with automated flights, (2) attractive flows and spatial
-
QUIET
- /en/research-topics/electric-powertrains/projects/quiet
development stages: analysis of current seat structure, design of lightweight seat structure and virtual test of strength, manufacturing of prototype parts, and building up the new QUIET demonstrator seat. Optimized
-
DigiCell
- /en/themen/battery-materials-characterization/projects/digicell
sustainable battery technologies. Innovations through DigiCell DigiCell optimizes the manufacturing and testing processes of battery cells and packs by integrating digital processes and data-driven analyses based
-
MULTI-FUN
- /en/research-topics/wire-based-additive-manufacturing/projects/multi-fun
and LCA will be performed on 7 industrial demonstrators, addressing structural parts, moulds and test equipment for aerospace, automotive and general industrial usage. By wide usage of cost-effective
-
Augmented CCAM
- /en/research-topics/road-safety-accident-research/projects/augmented-ccam
provision of safe stopping areas. These solutions will be evaluated at 7 physical and several virtual test sites in Europe (France, Latvia and Spain), offering a vast spectrum of environments (i.e., highway
-
Learning & Adaptive Mechatronic Systems
- /en/solutions/learning-adaptive-mechatronic-systems
, and robustness is achieved through the systematic use of rapid prototyping tools and relevant testing approaches. That is why model-based software design, represented by MiL, SiL or HiL, is an integral
-
HELENA
- /en/themen/solid-state-batteries/projects/helena
and processing, electrochemical characterization of individual battery components, assembly and testing of prototype pouch cells. Furthermore, the HELENA cell behaviour in realistic use cases from automotive
-
ICE GENESIS
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/ice-genesis
a validated new generation of 3D icing engineering tools (numerical simulation tools and upgraded test capabilities), addressing Appendix C, O and snow conditions, for safe, efficient, right first time
-
AI & MACHINE LEARNING
- /en/research-topics/ai-machine-learning
generalisation performance of a learning method refers to its predictive capability on independent test data. Assessing this performance is extremely important in practice, as it guides our choice of learning