Inhaltstyp
Kategorien
-
Space-Al-MMC
- /en/research-topics/wire-based-additive-manufacturing/projects/space-al-mmc
samples show promising results and complete infiltration of the fibres was achieved. The samples were tested under conditions similar to those in space and no performance degradation was observed. In addition
-
LH2-WAM-Tank
- /en/research-topics/wire-based-additive-manufacturing/projects/lh2-wam-tank
50550-6938 christian.schneider-broeskamp(at)ait.ac.at Project partners Dr. Ryll Lab GmbH TEST-FUCHS Aerospace Systems GmbH TEST-FUCHS GmbH Peak Technology GmbH Funding organization Österreichische Forschungsf
-
AZ91-PMD
- /en/research-topics/wire-based-additive-manufacturing/projects/az91-pmd
succeeded in producing welding wires with a diameter of 1.6 mm for the PMD process in the highest quality. Test specimens were welded and both corrosion and mechanical properties were derived. It was demonstrated
-
ADALFIC
- /en/research-topics/wire-based-additive-manufacturing/projects/adalfic
and the manufacturing process is more reliable. Project results It was possible to manufacture and test the connections at coupon level and component level - in normal as well as in cold and very warm ambient [...] conditions. The functionality was confirmed, the weight target was achieved and further application tests are being planned. × Kontakt Formular Pflichtfelder sind mit einem * markiert. Name * E-Mail * Betreff
-
DEDAluS
- /en/research-topics/wire-based-additive-manufacturing/projects/dedalus
through extensive theoretical and experimental work (objective 1). Alloy wires were then fabricated and tests carried out to characterise the WAAM-printed samples (objective 2). Process studies increased the
-
opt1mus
- /en/research-topics/numerical-simulation/projects/opt1mus
twins of production plants. This saves time, energy and avoids dangerous working conditions when testing new alloys or developing new processes. Despite the available possibilities for creating digital
-
KryoReIF
- /en/research-topics/casting-technologies/projects/kryoreif
(-196°C at normal pressure) serves to embrittle components of the material composite. Preliminary tests positively confirmed that there was no significant change in chip geometry during cryo-cleaning. Image [...] recovery of valuable raw materials, the avoidance of chemical and thermal processes. Micronizing tests on rubber showed that elastomers (which deform elastically and do therefore not grind well at room [...] laboratory operation for a metal and a plastic grade by LKR and TCKT, respectively. Further orientation tests on selected end-of-life/post-consumer waste types from two industries complete the scope of research
-
HTcoils
- /en/research-topics/wire-based-additive-manufacturing/projects/htcoils
manufacture sufficient wire materials for sub-assembly coils tests, final demonstration and qualification of high temperature coil systems and to test their functionality in electromagnet actuators for different [...] with a final diameter of 0.70mm The wire material proved its durability over 20.000 hours thermal testing leading to a thermal-like index of 274°C Compared to the baseline TLI 240°C this is an increase of
-
MULTI-FUN
- /en/research-topics/wire-based-additive-manufacturing/projects/multi-fun
and LCA will be performed on 7 industrial demonstrators, addressing structural parts, moulds and test equipment for aerospace, automotive and general industrial usage. By wide usage of cost-effective
-
Digitalization as a driving factor: LKR coordinates new COMET project "ProMetHeus"
rgie Montanuniversität Leoben – Lehrstuhl für Umformtechnik Research Center for Non Destructive Testing GmbH (RECENDT) AIT Austrian Institute of Technology GmbH, Center for Vision, Automation and Control
-
LKR: Successful completion of the Space-Al-MMC project
samples show promising results and complete infiltration of the fibres was achieved. The samples were tested under conditions similar to those in space and no performance degradation was observed. In addition
-
opt1mus: Digital Assistance Systems For Process Optimisation in Continuous Aluminium Casting
twins of production plants. This saves time, energy and avoids dangerous working conditions when testing new alloys or developing new processes. Despite the available possibilities for creating digital
-
HTCoils: Optimized Materials for High Temperature Coils
manufacture sufficient wire materials for sub-assembly coils tests, final demonstration and qualification of high temperature coil systems and to test their functionality in electromagnet actuators for different
- 1