Inhaltstyp
Kategorien
-
ADALFIC
- /en/research-topics/wire-based-additive-manufacturing/projects/adalfic
and the manufacturing process is more reliable. Project results It was possible to manufacture and test the connections at coupon level and component level - in normal as well as in cold and very warm ambient [...] conditions. The functionality was confirmed, the weight target was achieved and further application tests are being planned. × Kontakt Formular Pflichtfelder sind mit einem * markiert. Name * E-Mail * Betreff
-
HTcoils
- /en/research-topics/wire-based-additive-manufacturing/projects/htcoils
manufacture sufficient wire materials for sub-assembly coils tests, final demonstration and qualification of high temperature coil systems and to test their functionality in electromagnet actuators for different [...] with a final diameter of 0.70mm The wire material proved its durability over 20.000 hours thermal testing leading to a thermal-like index of 274°C Compared to the baseline TLI 240°C this is an increase of
-
Die-casting plants on the way to Industry 5.0
optimisation as well as quality control. The assistance system will be implemented and tested as a prototype on a test machine at the LKR in Ranshofen. The DG Assist project is scheduled to run until April
-
LH2-WAM-Tank
- /en/research-topics/wire-based-additive-manufacturing/projects/lh2-wam-tank
50550-6938 christian.schneider-broeskamp(at)ait.ac.at Project partners Dr. Ryll Lab GmbH TEST-FUCHS Aerospace Systems GmbH TEST-FUCHS GmbH Peak Technology GmbH Funding organization Österreichische Forschungsf
-
LKR: Successful completion of the Space-Al-MMC project
samples show promising results and complete infiltration of the fibres was achieved. The samples were tested under conditions similar to those in space and no performance degradation was observed. In addition
-
DEDAluS
- /en/research-topics/wire-based-additive-manufacturing/projects/dedalus
through extensive theoretical and experimental work (objective 1). Alloy wires were then fabricated and tests carried out to characterise the WAAM-printed samples (objective 2). Process studies increased the
-
Space-Al-MMC
- /en/research-topics/wire-based-additive-manufacturing/projects/space-al-mmc
samples show promising results and complete infiltration of the fibres was achieved. The samples were tested under conditions similar to those in space and no performance degradation was observed. In addition
-
AZ91-PMD
- /en/research-topics/wire-based-additive-manufacturing/projects/az91-pmd
succeeded in producing welding wires with a diameter of 1.6 mm for the PMD process in the highest quality. Test specimens were welded and both corrosion and mechanical properties were derived. It was demonstrated
-
MULTI-FUN
- /en/research-topics/wire-based-additive-manufacturing/projects/multi-fun
and LCA will be performed on 7 industrial demonstrators, addressing structural parts, moulds and test equipment for aerospace, automotive and general industrial usage. By wide usage of cost-effective
- 1