Inhaltstyp
Kategorien
-
Vehicle System Simulation
- /en/research-topics/vehicle-system-simulation
The range extends from vehicle design, prototype development, system analysis and modelling to testing and validation. An integrative approach and close cooperation between AIT experts from different
-
Battery Technologies
- /en/research-topics/battery-technologies
Preparation and Cell Production Component tests Prototype production Smart Cells with integrated sensor technology Read more Battery testing Safety tests Electrical tests according to accredited standards and [...] production technology on a semi-industrial scale, sensor technology for cell monitoring and battery testing, and finally system design. Our team adopts a holistic research and development approach aimed at [...] n (in- and ex-situ methods) Post-mortem analysis Accredited electrical, environmental and safety tests on cell, module and system level SOX (State of Health, State of Charge, etc.) determination Simulations
-
MOGLI
- /en/research-topics/sustainable-smart-battery-manufacturing/projects/mogli
develop the method of ultrasound diagnostics for lithium-ion accumulators, which has already been tested in the laboratory (TRL3), into a practical application (TRL5). This should enable fast and low-cost [...] their effect on ultrasound diagnostics will be understood, and alternative sensor systems will be tested. For this purpose, optical fibers are inserted into the cell in order to directly measure strain
-
No-Ice-Rotor
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/no-ice-rotor
demonstrator Validate the structural and environmental performance with tests on coupons Validate the ice protection system performance by testing the demonstrator in a large scale Icing Wind Tunnel Facts NO-ICE-ROTOR
-
The Battery Show Europe 2019
chemistries. At the AIT Battery Test Laboratory a variety of tests is carried out – from electrical, through calender and cycle ageing up to safety and customized tests. "AIT is one of the few in [...] value chain - from the synthesis of new battery materials to electrodes and cell production, battery testing, diagnostics and simulation all the way through to post mortem analysis. The state-of-the-art [...] Laboratory enables comprehensive research into battery materials through accredited analysis and testing methods. The research focus here is on the development of high-performance electrode materials,
-
Power Electronics as a Key Technology
precise co-ordination becomes essential to ensure the energy supply stability where AIT provides a test bed for converters up to the MW range. In addition, real-time simulation converter models (digital [...] microgrid, is presented as a Battery Energy Storage System. To enable grid integration of e-Mobility a test and validation system for charging infrastructure (up to 300kW) and electric vehicles will be shown
-
TinSLIB
- /en/research-topics/battery-technologies/translate-to-english-projecte/tinslib
In the project, high purity tin sulfides are developed, which are characterized, investigated and tested on laboratory scale as new anode materials for Li-ion batteries to meet the requirements for battery [...] Frimeco will jointly develop high purity tin sulfides, which will be characterized, investigated and tested on laboratory scale as new anode materials for LIB. Facts TinSLIB – Optimized Processing Parameters
-
QUIET
- /en/research-topics/electric-powertrains/projects/quiet
development stages: analysis of current seat structure, design of lightweight seat structure and virtual test of strength, manufacturing of prototype parts, and building up the new QUIET demonstrator seat. Optimized
-
TRIcEPS
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/triceps
washing system. The full system will be tested and qualified through extensive testing, which will include Icing wind tunnel measurements and structural tests. TRIcEPS will deliver the air intake, its
-
ICE GENESIS
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/ice-genesis
a validated new generation of 3D icing engineering tools (numerical simulation tools and upgraded test capabilities), addressing Appendix C, O and snow conditions, for safe, efficient, right first time
-
IMPACT
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/impact
will also optimize its aerostructural properties and validate the technology with Icing Wind Tunnel tests. The four main objectives of IMPACT are: unlocking the capability to perform fast and accurate 3D [...] passive anti-ice coating and devices by means of large scale icing wind tunnel (IWT) experimental tests. Facts IMPACT – Aircraft advanced rear end and empennage optimisation enhanced by anti-ice coatings
-
InSPIRe
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/inspire
LE composite structure. Performance verification are pursued by means of an Icing Wind Tunnel (IWT) test campaign to contribute to reaching TRL5 for the selected IPS technologies. Facts InSPIRe - In novative
-
SNOWING
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/snowing
to enable experimental snow testing in an IWT: a cloud chamber capable of generating artificial snow with the same properties as found in nature suitable for aeronautic testing applications. The cloud chamber [...] nature-equivalent snow. Nowadays, all-weather aircraft airworthiness certification requires flight tests in hazardous natural snowstorms since all artificial snow generated with the currently available methods [...] and is therefore not acceptable for airworthiness certification. Beside the intrinsic risk of such tests, they are difficult to schedule due to the rarity of natural events conforming to the require-ments
-
EMPA-Trac
- /en/research-topics/high-efficiency-power-electronics/projects/empa-trac
versatility and total cost of ownership for numerous challenging municipal applications in a demo field test with five municipalities from the Climate & Energy Model Region Tullnerfeld-East participating. Facts
-
Batterieforschung: Erfolgreiche PhD-Abschlüsse von Martina Romio und Hartmut Popp
ait.ac.at/files/PubDat_AIT_147715.pdf The dissertation deals with the non-destructive mechanical testing of lithium-ion secondary batteries to determine their structural properties. The work has shown that
-
ORCHESTRA
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/orchestra
wiring harness solutions, thermal management, electrical energy storage, experimental and virtual testing, and system integration. The consortium partners from academia (Uni Nottingham), research (AIT, CIRA
-
ORCHESTRA: On the way to the Electric Aircraft of the future
wiring harness solutions, thermal management, electrical energy storage, experimental and virtual testing, and system integration. The consortium partners from academia (Uni Nottingham), research (AIT, CIRA
-
JOICE
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/joice
and mechanical sub-systems as well as icephobic/superhydrophobic coatings Documentation of icing tests with the aid of high-resolution optical methods including roughness evaluations of ice surfaces D
-
LOM-Ice
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/lom-ice
current technological and modelling gaps in snow testing. Ultimately, this will enhance the competitiveness of Austrian RTOs in the field of icing and snow testing and simulation. Funded by the Federal Ministry [...] Aviation Safety Agency (EASA) to comply with the Certification Specifications. Icing wind tunnel tests represent one of the most important means of compliance in this respect. Icing and snow conditions [...] injecting water particles (liquid droplets or iced particles) in the airflow. Major challenges in testing Supercooled Large Droplet and snow conditions impose the needs for a detailed characterization and
-
Start of the LOM-Ice Project
current technological and modelling gaps in snow testing. Ultimately, this will enhance the competitiveness of Austrian RTOs in the field of icing and snow testing and simulation. Contact: Damiano Tormen Project [...] Aviation Safety Agency (EASA) to comply with the Certification Specifications. Icing wind tunnel tests represent one of the most important means of compliance in this respect. Icing and snow conditions [...] injecting water particles (liquid droplets or iced particles) in the airflow. Major challenges in testing Supercooled Large Droplet and snow conditions impose the needs for a detailed characterization and