-
COMBO3D
- /en/research-topics/numerical-process-simulation/projects/combo3d
COMBO3D COmposite Mould Tool Based On 3D Printing Fig. 1: 3D-printed CFRP mono-block © Lehrstuhl für Carbon Composites, TUM COMBO3D (COmposite Mould Tool Based On 3D Printing) is a European joint project [...] guarantee the temperature homogeneity in the RTM method. Facts COMBO3D – COmposite Mould Tool Based On 3D Printing Programme: H2020-EU.3.4.5.4. - ITD Airframe, Clean Sky 2 Joint Undertaking Funding agency: [...] project that demonstrates the possibility of 3D-printing an advanced thermoplastic composite molding tool using additive manufacturing . Fabricated by its project coordinator, Chair of Carbon Composites of
-
COMBO3D: 3D printed tool for industrial manufacturing
COMBO3D (COmposite Mould Tool Based On 3D Printing) is a European joint project that demonstrates the possibility of 3D-printing an advanced thermoplastic composite molding tool using additive manufacturing [...] Fabricated by its project coordinator, Chair of Carbon Composites of Technical University of Munich, these 3D-printed advanced tools will be further used as resin transfer mold (RTM) tools for the production of [...] is on the optimal cooling channel design. As result, the world largest CFRP mono-block was 3D-printed as an RTM tool (fig.1) which uses LKR proposed counter-flow channels. To achieve a more homogeneous
-
VALU3S
- /en/research-topics/dependable-systems-engineering/projects/valu3s
VALU3S (Experimental) Verification and validation of automated systems against common requirements such as safety, security, and privacy, using a layered test framework. Manufacturers of automated systems [...] systems and their components have been allocating an enormous amount of time and effort in R&D activities for developing new technologies and systems. Those innovations translate into an overhead on the V&V [...] reliably. This process is currently very time-consuming and thereby costly. The ECSEL JU project VALU3S (“Verification and Validation of Automated Systems’ Safety and Security”) aims to evaluate the sta
-
FiBack3
- /en/research-topics/dependable-systems-engineering/projects/fiback3
FiBack3 Increasing the security of devices procured by BMLV (embedded systems) by examining binary files for backdoors. A large part of the critical IT infrastructure and IoT devices used by the BMLV is [...] is manufactured outside of Austria and Europe. The FiBack3 project, which is being carried out as part of the FFG funding program FORTE (2020), aims at the (partly) automated analysis of this more critical [...] manufacturer. Until now, such an analysis was largely manual and therefore very time-consuming. FiBack3 will increase automation of this process, from firmware extraction to backdoor detection, and thus create
-
3D inline surface inspection with xposure:photometry
Automated optical surface inspection for quality control is an integral part of industrial manufacturing processes. The AIT Austrian Institute of Technology supports companies in being internationall
-
3D-Druck von Leichtmetallen: LKR leitet COMET-Projekt
Vor kurzem erfolgte das Kickoff für das COMET-Projekt „We3D“ (Wire-based additive manufacturing – materials and technologies – for 3D metal structures of the future). In den nächsten vier Jahren forscht [...] gefertigt werden. Im Rahmen des COMET-Projekts „We3D“ soll WAM nun entsprechend weiterentwickelt werden: Ziel der Forschungsvorhabens mit einem Gesamtvolumen von 5,3 Mio. Euro ist es, die Technologie für neue [...] WAM gilt als künftige Schlüsseltechnologie, bei der Schweißdrähte für den schichtweisen Aufbau großer 3D-Teile verwendet werden, die mit pulverbasierten AM-Technologien nicht hergestellt werden können. WAM
-
We3D
- /en/research-topics/wire-based-additive-manufacturing/projects/we3d
We3D Light metal components from the 3D printer With the funding commitment for the COMET project "We3D" (Wire-based additive manufacturing – materials and technologies – for 3D metal structures of the [...] processed. We3D: Next generation additive manufacturing Wire-based Additive Manufacturing (WAM) is regarded as a key future technology, using welding wires for the layer-by-layer manufacturing of large 3D parts [...] the framework of the COMET project "We3D", WAM will now be further developed accordingly: The aim of the research project with a total volume of approximately 5.3 million euros is to further develop the
-
High-speed 3D inspection with any industrial camera
fields of applications. He will also address a recently published study comparing AIT ICI with other 3D imaging technologies on the market. The study showcases that the strengths of AIT Inline Computational
-
3D Road Texture Scanner
- /en/solutions/acoustics-and-noise-abatement/3d-road-texture-scanner
3D Road Texture Scanner Lab on the road At the AIT Center for Transport Technologies, we investigate tyre-road interaction to reduce tyre rolling noise, increase safety (grip) and reduce tyre rolling [...] High-precision capture of the 3D texture of a road surface “Lab on the road” for science and industry Automated road condition monitoring for road authorities Correlation of 3D texture parameters with rolling [...] resistance (CO2 emission). We have therefore developed a new high-performance 3D road texture scanner that enables precise scanning of the road surface - on test panels or small sections, or even in moving
-
New plugin for 3D height measurement in cloud-compare
Users of the 3D point cloud and mesh processing software CloudCompare can now enjoy a new 3D measurement tool for determining the height of points in virtual models. Philip Klaus, employee of the research [...] Imaging AIT Inline Computational Imaging (ICI) is a novel single sensor technology for simultaneous 2D and 3D inline inspection even for challenging inspection tasks. For more information see: https://www.ait [...] until now. "We work a lot with CloudCompare to visualize, measure, cut and evaluate the quality of our 3D reconstructions we get through our Inline Computational Imaging System. But unfortunately, it was not
-
3D audio navigation for elderly people
become a challenge. The target group needs intuitive navigation aids with a low entry barrier. In the 3D Audio Navigation project, the AIT Center for Technology Experience, Dreamwaves and the Hilfsgemeinschaft
-
We3D: Lightmetals Components from the 3D Printer
Technology: With the funding commitment for the COMET project "We3D" (Wire-based additive manufacturing – materials and technologies – for 3D metal structures of the future), a comprehensive research project [...] processed. We3D: Next generation additive manufacturing Wire-based Additive Manufacturing (WAM) is regarded as a key future technology, using welding wires for the layer-by-layer manufacturing of large 3D parts [...] the framework of the COMET project "We3D", WAM will now be further developed accordingly: The aim of the research project with a total volume of approximately 5.3 million euros is to further develop the
-
3D camera for various detection applications
- /en/research-topics/surveillance-protection/design-and-development-of-embedded-vision-systems/3d-camera-for-various-detection-applications
3D camera for various detection applications 3D camera for various detection applications This EMC certified stereo camera head consists of three embedded image sensors with an integrated Ethernet hub [...] hub and is powered over Ethernet. 3D depth calculation software is available. The design can be used for various security-relevant surveillance applications such as tailgating or piggybacking. Three cameras
-
BMDW supports 8 projects in the FFG programme COIN with around 3.5 million euros
the further development of the Styrian harmonica (Quetschn) with the help of digitalization (keyword 3D printing), to the early diagnosis of dementia using artificial intelligence, to a network for the [...] Ministry for Digitisation and Business Location (BMDW) is funding a total of eight projects with around 3.5 million euros. The Austrian Research Promotion Agency (FFG) will be responsible for handling the projects
-
EU-Kommission veröffentlicht Studie zu 3D-Druck in Europa
Leistungsvermögen im Bereich des 3D-Drucks bleibt fragmentiert und auf spezifische Regionen in Westeuropa beschränkt. So konnte nur eine kleine Anzahl an Herstellern von 3D-Druckern bzw. an spezialisierten [...] veröffentlichte die Europäische Kommission den Endbericht einer Studie zu Additive Manufacturing (AM)/3D-Druck in Hinblick auf gegenwärtige und zukünftige Anwendungsbereiche, bereits existierende Wertsch [...] Industrie relevante Anwendungsbereiche, die im Rahmen der Studie im Detail analysiert wurden, umfassen den 3D-Druck von Teilen für die Innenausstattung von Autos, von Maschinen und Flugzeugen, von Fertigungsformen
-
3D Dentalscanner
- /en/about-the-ait/center/center-for-vision-automation-control/assistive-autonomous-systems/projects/3d-dentalscanner
3D Dentalscanner Under a contract research project sponsored by dental technology company a.tron3d of Carinthia, Austria, experts from the AIT have developed the smallest intelligent optical 3D scan sensor [...] impressions. In collaboration with our partner, a.tron3d, the AIT team succeeded in developing something novel and unique in the area of 3D technology. The 3D intraoral scanner is equipped with a stereo camera [...] thus acquired is used to create a 3D image in real time, thus obviating the need for time-consuming silicone impressions. Thanks to its extremely practical shape, the 3D intraoral scanner is fully mobile
-
3D-printed lightweight aluminum tanks
Oops, an error occurred! Code: 20240905093501706e8f01
-
Visit us at the Control trade fair 2024 in Stuttgart
Oops, an error occurred! Code: 20240903145001331493d2
-
AIT bei der Langen Nacht der Forschung 2024
- /en/blog/ait-bei-der-langen-nacht-der-forschung-2024
sogenannte Draht-basierte additive Fertigung (WAM = wire arc additive manufacturing ), die eine Form von 3D-Druck mit Metallen darstellt. Damit können auch sehr kompliziert geformte Gegenstände rasch und wi [...] machen. Die AIT Mobility Observation Box wurde bereits mehrfach ausgezeichnet – unter anderem mit dem Ö3 Verkehrsaward oder dem wichtigsten Europäischen Preis für Verkehrssicherheit (ERSC). Mehr Informationen
-
InVISION Top Innovations 2023: ICI:Microscopy
ICI:Microscopy for 3D high-performance inline quality inspection was awarded as a top innovation 2023 by inVISION. The 3D microscope was developed by the High-Performance Vision Systems research group [...] on variant of Inline Computational Imaging (ICI) technology. This enables inline 3D microscopy with up to 60 million 3D points/s. Scanning speeds of up to 12mm per second can be achieved with a lateral [...] information pls check : https://intranet.ait.ac.at/newsroom/up-to-date/news/detail/?tx_ttnews%5Btt_news%5D=7143&cHash=085236deedd9da11aecea876c199bd10 https://invision-news.de/top-innovations/
Searched for "3d".
Found 263 results in 29 milliseconds.
Displaying results 181 to 200 of 263.