Inhaltstyp
Kategorien
-
ZDM
- /en/research-topics/forming-technologies/projects/zdm
to improve production processes in terms of performance indicators such as quality (scrap rate), energy consumption, and productivity by integrating information from sensors, simulation, and other production [...] Master thesis, TU Vienna, 2020. Funded by the Federal Ministry for Climate Protection, Environment, Energy, Mobility, Innovation and Technology (BMK) and the Austrian Research Promotion Agency (FFG). × Kontakt
-
Pro-Imagine
- /en/research-topics/forming-technologies/projects/pro-imagine
steadily growing energy consumption and CO2 emissions. In Europe, the mobility sector is responsible for almost 30% of total final energy consumption, making it the largest single energy consumer. The goal [...] on using magnesium offers significant potential for energy savings in operational use. Magnesium (Mg) can be obtained relatively cleanly and energy-efficiently from raw materials that are readily available [...] application, while at the same time achieving significant energy savings. Funded by the Federal Ministry for Climate Protection, Environment, Energy, Mobility, Innovation and Technology (BMK) and the Austrian
-
Ein Green Deal für die Luftfahrt
der Flugverkehr zunehmend in die Kritik. Einer aktuellen internationalen Studie der International Energy Agency (IEA) zufolge trägt die Luftfahrt am menschengemachten Klimawandel mit rund 2,5 Prozent der [...] multifunktionale strukturelle Bauteile für Flugzeuge entwickelt, die auch als Speicher von elektrischer Energie dienen. Und auch im Rahmen von IMOTHEP und ORCHESTRA wird mit AIT-Beteiligung die Entwicklung lu
-
Data-T-Rex
- /en/research-topics/forming-technologies/projects/data-t-rex
resulting optimisation of manufacturing processes can achieve an avoidance of production waste and save energy. Project manager Carina Schlögl from the LKR: "Sustainable optimisations in metal processing are
-
The Data-T-Rex Project: Data-based optimisation of metallurgical phenomena
resulting optimisation of manufacturing processes can achieve an avoidance of production waste and save energy. Project manager Carina Schlögl from the LKR: "Sustainable optimisations in metal processing are
-
AIT develops Method for Lithium Detection
all types of electric vehicles and increasingly for use in stationary energy storage systems due to their comparatively high energy density and service life. It was only consistent that the 2019 Nobel Prize [...] groping in the dark. Lithium is hard to detect An electron microscope equipped with a detector for energy dispersive X-ray spectroscopy (EDS) is usually used to determine distribution profiles and maps of [...] detectors. Although lithium atoms also emit characteristic X-rays when excited, these are so low-energy that they cannot be detected. Consequently, when creating an EDS map of a sample containing lithium
-
Projektstart DigiTrans: AIT sondiert Testgebiet für autonomes Fahren in Oberösterreich
ur Business Upper Austria, das LOGISTIKUM Steyr - FH OÖ und das IESTA - Institut für innovative Energie- & Stoffaustauschsysteme e.V. „Das AIT unterstützt die Forschung und Technologieentwicklung in
-
We3D
- /en/research-topics/wire-based-additive-manufacturing/projects/we3d
produced from new WAM-compatible welding wires made of aluminium and magnesium in a material and energy-saving, high-quality, cost-effective and time-efficient manner. In the framework of the COMET project [...] location. The consortium would like to thank the Federal Ministry of Climate Action, Environment, Energy, Mobility, Innovation and Technology (BMK), the Federal Ministry Labour and Economy (BMAW), the Austrian
-
We3D: Lightmetals Components from the 3D Printer
produced from new WAM-compatible welding wires made of aluminium and magnesium in a material and energy-saving, high-quality, cost-effective and time-efficient manner. In the framework of the COMET project
-
DISCO2030
- /en/research-topics/wire-based-additive-manufacturing/projects/disco2030
based on additive manufacturing (AM) technologies from the new Powder Bed Fusion (PBF) and Directed Energy Deposition (DED) technology families. DISCO2030 combines the advantages of PBF and DED to enable
-
AIT auf der Hannover Messe 2017
Industrieautonomie über IT und Zulieferung, Produktionstechnologien und Dienstleistungen bis hin zu Energie und Mobilitätstechnologie. Für das Jahr 2017 werden 6.500 Aussteller und rund 200.000 Besucher erwartet
-
LH2-WAM-Tank
- /en/research-topics/wire-based-additive-manufacturing/projects/lh2-wam-tank
material to reduce weight and significantly increase gravimetric storage density in order to reach an energy-technically reasonable level. New LH2 tank concepts in combination with innovative manufacturing
-
18th A3PS Conference: Eco-Mobility 2023
the successful development and market introduction of efficient propulsion concepts and sustainable energy carriers. The conference is thematically organised into four sessions: “Battery Electric Vehicle”
-
16th International A3PS Conference
actual development and market introduction of efficient propulsion concepts and sustainable energy carriers. Bonded by the European Green Deal, we are all together on the way to a climate neutral
-
13. Ranshofener Leichtmetalltage 2024: Early Bird tickets still available until June 30!
Austria AG, 4a engineering GmbH, Nedschroef and the Federal Ministry for Climate Action, Environment, Energy, Mobility, Innovation and Technology for their support!
-
13. Ranshofener Leichtmetalltage 2024
Austria AG, 4a engineering GmbH, Nedschroef and the Federal Ministry for Climate Action, Environment, Energy, Mobility, Innovation and Technology for their support!
-
Dr. Christian Chimani at the 10th vie-mobility Symposium
for an environmentally compatible, inclusive mobility and transport system as well as a sustainable energy supply and a secure infrastructure for all road users." This year, vie-mobilty, the platform for [...] demographic growth and what does this mean for investments in transport infrastructure, mobility and energy supply? And how can digital solutions and new value creation models be further developed and implemented
-
opt1mus: Digital Assistance Systems For Process Optimisation in Continuous Aluminium Casting
components. At the same time, their production and processing require high amounts of energy. However, the energy efficiency of these processes can be greatly improved by establishing cyber physical systems [...] these trials can be carried out virtually using digital twins of production plants. This saves time, energy and avoids dangerous working conditions when testing new alloys or developing new processes. Despite [...] we focus on the foundry workers. How can we support them with digital methods so that not only the energy efficiency in processes can be increased, but also the interaction with the machine becomes more
-
opt1mus
- /en/research-topics/numerical-simulation/projects/opt1mus
components. At the same time, their production and processing require high amounts of energy. However, the energy efficiency of these processes can be greatly improved by establishing cyber physical systems [...] these trials can be carried out virtually using digital twins of production plants. This saves time, energy and avoids dangerous working conditions when testing new alloys or developing new processes. Despite [...] work through digital assistance. Funded by the Federal Ministry for Climate Protection, Environment, Energy, Mobility, Innovation and Technology (BMK) and the Austrian Research Promotion Agency (FFG) as part
-
Wire-based additive manufacturing (WAM): Major research success for the LKR
manufacture highly stressed structural components for various applications in a resource-saving and energy-efficient way." Stephan Ucsnik, Thematic Coordinator for wire-based additive manufacturing, adds: [...] - not only in aviation and aerospace, but also in ground-based sustainable mobility systems, the energy sector or prototyping." The results were published in the paper "Wire-arc additive manufacturing