Inhaltstyp
Kategorien
-
HighSpin
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/highspin
base – to meet the respective requirements of vehicles and aircraft. The cells will be installed and tested in module demonstrators with high energy density, power density and long-lasting durability for road [...] investment in new types of production equipment. Two different recycling processes are also being tested in HighSpin to reuse the recycled metals as part of the active materials for new cells, contributing
-
SELFIE
- /en/research-topics/electric-powertrains/projects/selfie
functionality testing as well as functional safety modeling. The overall solution finds its practical application in a demonstration vehicle – a Fiat Doblò, validated by comprehensive test series on test benches [...] benches, test tracks and in real road traffic. As part of the high-level project consortium, AIT experts were involved in CFD simulations for the numerical modeling of multiphase flows in heat exchangers.
-
Augmented CCAM
- /en/research-topics/road-safety-accident-research/projects/augmented-ccam
provision of safe stopping areas. These solutions will be evaluated at 7 physical and several virtual test sites in Europe (France, Latvia and Spain), offering a vast spectrum of environments (i.e., highway
-
HELENA
- /en/themen/solid-state-batteries/projects/helena
and processing, electrochemical characterization of individual battery components, assembly and testing of prototype pouch cells. Furthermore, the HELENA cell behaviour in realistic use cases from automotive
-
SUBLIME
- /en/themen/solid-state-batteries/projects/sublime
is the development of a comprehensive value chain, spanning from initial requirements to rigorous testing, for novel sulfide electrolyte-based solid-state battery cells with increased charge and energy densities
-
Space-Al-MMC
- /en/research-topics/wire-based-additive-manufacturing/projects/space-al-mmc
samples show promising results and complete infiltration of the fibres was achieved. The samples were tested under conditions similar to those in space and no performance degradation was observed. In addition
-
LH2-WAM-Tank
- /en/research-topics/wire-based-additive-manufacturing/projects/lh2-wam-tank
50550-6938 christian.schneider-broeskamp(at)ait.ac.at Project partners Dr. Ryll Lab GmbH TEST-FUCHS Aerospace Systems GmbH TEST-FUCHS GmbH Peak Technology GmbH Funding organization Österreichische Forschungsf
-
AZ91-PMD
- /en/research-topics/wire-based-additive-manufacturing/projects/az91-pmd
succeeded in producing welding wires with a diameter of 1.6 mm for the PMD process in the highest quality. Test specimens were welded and both corrosion and mechanical properties were derived. It was demonstrated
-
ADALFIC
- /en/research-topics/wire-based-additive-manufacturing/projects/adalfic
and the manufacturing process is more reliable. Project results It was possible to manufacture and test the connections at coupon level and component level - in normal as well as in cold and very warm ambient [...] conditions. The functionality was confirmed, the weight target was achieved and further application tests are being planned. × Kontakt Formular Pflichtfelder sind mit einem * markiert. Name * E-Mail * Betreff
-
DEDAluS
- /en/research-topics/wire-based-additive-manufacturing/projects/dedalus
through extensive theoretical and experimental work (objective 1). Alloy wires were then fabricated and tests carried out to characterise the WAAM-printed samples (objective 2). Process studies increased the
-
COUNT
- /en/research-topics/structural-dynamics-and-assessment/projects/count
will be tested for the first time under real conditions. For this purpose, test specimens are systematically excited to vibrate using the Mobile Seismic Simulator (MoSeS) of the AIT. In further test series
-
IntelLiGent
- /en/research-topics/sustainable-smart-battery-manufacturing/projects/intelligent
processes cutting edge materials to final electrodes on pilot scale. Promising material candidates are tested in multilayer pouch cells and electrodes are distributed to partners for further development. David
-
MOGLI
- /en/research-topics/sustainable-smart-battery-manufacturing/projects/mogli
develop the method of ultrasound diagnostics for lithium-ion accumulators, which has already been tested in the laboratory (TRL3), into a practical application (TRL5). This should enable fast and low-cost [...] their effect on ultrasound diagnostics will be understood, and alternative sensor systems will be tested. For this purpose, optical fibers are inserted into the cell in order to directly measure strain
-
Vehicle System Simulation
- /en/research-topics/vehicle-system-simulation
The range extends from vehicle design, prototype development, system analysis and modelling to testing and validation. An integrative approach and close cooperation between AIT experts from different
-
Sustainable & Smart Battery Manufacturing
- /en/research-topics/sustainable-smart-battery-manufacturing
on all aspects of sustainable cell production, from electrode manufacturing to cell assembly and testing. Our dry room is equipped with a modern research pilot line to produce stacked pouch cells and allows
-
SENBRIDGE
- /en/research-topics/structural-dynamics-and-assessment/projects/senbridge
and thus better temporal resolution of the data. In 2018 and 2019, a pilot study was implemented to test in principle the applicability of the methodology on the ASFINAG road network. The following core [...] fusion - that is, combining different methods and sensors to reduce errors and increase resolution. Test of the corner reflectors at the AIT site in Seibersdorf; these will later be installed on the Schottwien
-
OnboardEU
- /en/research-topics/structural-dynamics-and-assessment/projects/onboardeu
measurement data, the AI algorithms for condition monitoring and noise mapping are developed and tested. In the project, AIT takes on the task of supervised machine learning to automatically detect track
-
JOICE
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/joice
and mechanical sub-systems as well as icephobic/superhydrophobic coatings Documentation of icing tests with the aid of high-resolution optical methods including roughness evaluations of ice surfaces D
-
ORCHESTRA
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/orchestra
wiring harness solutions, thermal management, electrical energy storage, experimental and virtual testing, and system integration. The consortium partners from academia (Uni Nottingham), research (AIT, CIRA
-
LOM-Ice
- /en/research-topics/hybrid-electric-aircraft-technologies/projects/lom-ice
current technological and modelling gaps in snow testing. Ultimately, this will enhance the competitiveness of Austrian RTOs in the field of icing and snow testing and simulation. Funded by the Federal Ministry [...] Aviation Safety Agency (EASA) to comply with the Certification Specifications. Icing wind tunnel tests represent one of the most important means of compliance in this respect. Icing and snow conditions [...] injecting water particles (liquid droplets or iced particles) in the airflow. Major challenges in testing Supercooled Large Droplet and snow conditions impose the needs for a detailed characterization and